Airless CA-100S

The AIRLESS CA-100S equipment uses an external mixing gun with an airless combination air assisted with an exclusive air container system.

The gun uses a unique airless combination, air attended with an exclusive air contention system.

The resin gel-coat leaving the spray tip has a catalyst flow immediately introduced in both leque’s sides invading the resin completely and then the mixing material and involved in 360° by an air container buckler.

The catalyst immediate introduction increases the two materials together charged time giving a completed integration and catalyst mixture in the resin/gel-coat and the air buckler prevent the free catalyst particles escape from the spray. This way there is a complete dispensed catalyst use and the damage caused by the free catalyst in the atmosphere are virtually eliminated.

In the CA-100S equipment, with gun assembled, a high performance roving cutter has air motor speed control and direction adjust (horizontal-vertical) for glass direction control.

The 11:1 resin pump slaved to the catalyst pump, built in stainless steel, dispense an exact 0,5% to 4,5% resin volume percentage.

Roving brake, ceramic guides and two roving boxes rack incorporated to the arms set in the CA-100S equipments.

---

REQUIREMENTS
AIRLESS CA-100S
Air Required: 25 cfm a 100 psi
Out Put: 9 kg/min
Weight: 160 kg