The Fiberglass reinforced plastic, due to its versatility is enlarged used at the civil construction industry, at the automobilistic industry, at the furniture industry, and at the nautic industry
between others.
The spray process, used in opened moulds, as the RTM process, used in closed molds, are ones of the application ways joining the resin and the catalyst to the fiberglass reinforce.
At the spray process equipments, there are guns with an especial cutter, they project and join the resin and catalyst with the fiberglass hole cutted still in the air before they enter in contact with the mould, in which they will be compacted through the resin rollers and brushes.
The wet-out equipments are used when a fiberglass is used in blankets or cloths; they are over the mould you just have to applicate resin with catalyst for doing impregnation.
At the RTM process (Resin Transfer Molding), used in closed moulds, the fiberglass is priorly put inside a mould where resin with catalyst will be injected.
The gel-coat is a coloured resin, which is used to put out the piece finished, it is applicated on the mold before lamination or dispensing start process.
Some samples of fiberglass applications are available by clicking here.
In order to make it easier to you, follows the equipments main characteristics:
 SPRAY-UP 200: : Internal mixture gun, air atomization, glass cutter, catalyst injector, 4 : 1 resin pump, air manifold, solvent tank.
 FAN-JET A600: External mixture gun, air atomization, instant catalyst start system, glass cutter, catalyst injector, 4 : 1 resin pump, air manifold.
 AIRLESS R500: External mixture gun, instant catalyst start system, glass cutter, catalyst injector, 11 : 1 resin pump, air manifold.
  AIRLESS CA-100S: External mixture gun, instant catalyst start system, glass cutter, catalyst slave pump, 11 : 1 resin pump, air manifold.
AIRLESS CA-100G: External mixture gun, instant catalyst start system, catalyst slave pump, 11 : 1 gel-coat pump, air manifold.
 GEL-COAT 180: External or internal mixture gun for gel-coat application, air atomization, catalyst injector, gel-coat pressure tank, solvent tank, air distributor car.
 ECONOGEL 2001: Gun with a catalyst spray set joined to the gun frontal body.
 RTM-88: Gun with a static mixer, catalyst slave pump, 11 : 1 resin pump, air manifold, solvent tank.
 RTM-100: Mixture Head with static mixer, buttonhole with dispensing button, catalyst slave pump, 11 : 1 resin pump, solvent tank, air manifold, cart, mast and boom.
RTM-100R: Mixer head with static mixer, buttonhole with dispensing button, catalyst slave pump, 11 : 1 resin pump, beats counter, recirculation set, solvent tank, air manifold, cart, mast and boom.
RTM-100AUT: Static mixer with mixer head, buttonhole with dispensing button, programmable logic control, catalyst slave pump, 11 : 1 resin pump, beats counter, recirculation set, solvent tank, air manifold, command panel, double cabinet.
 KSC-100: System for charge application on the resin spray through the joined gun set.
 FIBER-CUTTER: Fiberglass cutter set assembled in an air gun.
|
add to favorites
set as home page
send email